Jig / Other

Product list

Three-phase AC generator MDAC-4A

In case of fixed installation
When mounting vertically

Characteristics

  • MDAC series lightest weight approximately 14 kg
  • Three-phase AC generator used in testing to generate three-phase voltage and current from a single-phase (World wide) power source.
  • Voltage, current, frequency, phase can be individually set
  • Reduced testing process time
  • Voltage, current, frequency, and phase can be set individually.
  • With voltage output protection function
Main Specifications
Output voltage Output range: 0 to 160.0 V Equivalent 3 phase output (line voltage)
Output capacity: 3 phase output 166 V A max (55.4 V A x 3)
(Phase voltage = 92.4 Vmax, phase current = 0.6 Amax)
Output current Output range: 0 to 5.00 A (design value 6.00 A) equivalent 3-phase output (phase current)
Output capacity: Three-phase output 75 VA max (25 V A x 3)
(Phase voltage = 5 Vmax, phase current = 5 Amax)
Frequency 40.00~69.99Hz / 0.01Hz step
Phase Lag180°~ Lead 180°/ 1°step
Input power supply Single phase AC 100 V to 240 V ± 10% (45 to 65 Hz)
Ground type 2P 15A plug
External dimensions 430 mm (W) x 177 mm (H) x 400 mm (D) (not including projections)
* Vertical usable
Weight Approximately 14 kg (body only)
Option Transport case
Phase variable step 0.1 ° (Output accuracy within ± 1 °)
External control input connector (remote control)

Page top

Three-phase AC generator MDAC-5A

Optional product transport case
(Made of high density polyethylene)
* Common to MDAC-4A, MDAC-5A

Characteristics

  • Three-phase AC generator for testing that generates three-phase voltage and current from a single-phase (worldwide) power supply
  • Reduced testing process time
  • External control is also possible from sequencer, personal computer, etc. (Standard installed)
  • With voltage output protection function
  • Custom built according to customer's request
Main Specifications
Output voltage Output range: 0 to 220 V equivalent 3-phase output (line voltage)
Output capacity: Three-phase power supply 381 V A max (127 V A x 3)
(Phase voltage = 127 Vmax, phase current = 1A max)
Output current Output range: 0 to 20.0 A Equivalent 3 phase output (phase current)
Output capacity: Three phase output 120 VA max (40 V A x 3)
(Phase voltage = 2 Vmax, phase current = 20 A max)
Frequency 40.00 - 69.99 Hz / 0.01 Hz Step
Phase Lag180°~ Lead 180°/ 1° Step
Input power supply Single phase AC 100 V to 240 V ± 10% (45 to 65 Hz)
Ground type 2P 15A plug
Power consumption 1500VA max
External dimensions 420 mm (W) x 244 mm (H) x 460 mm (D) (no projections included)
Weight Approximately 22 kg (body only)
Option Transport case
Full panel cover
Overseas power plug

Page top

LED Light Source DKVW Series

Emission spectrum [nm]
Optical specification
Effective light emitting part size DKVW-100100: 100 mm × 100 mm
DKVW-300200: 300 mm × 200 mm
DKVW-500400: 500 mm × 400 mm
DKVW-700515: 700 mm × 515 mm
DKVW-1100800: 1100 mm × 800 mm
DKVW-14001000: 1400 mm × 1900 mm
Light source 100 mm × 100 mm diffusion BOX
* Reference) In the case of the light emitting part 500 × 400, use 20 LEDs
Correlated color temperature 5,000 to 5,300 K
Surface brightness 1,450cd/㎡
* Surface measurement with luminance meter (BM-4000) manufactured by KYOCERA Electric Co.
Brightness unevenness Within ± 10%
※ When divided into 35, the luminance unevenness within the divided plane is ± 10%
Luminance aging rate Within 3% at 60 minutes after the power is turned on (stable in about 30 minutes)
Main Specifications
External dimensions Width / Height = Dimensions of Light-Emitting Unit + Length 40 mm × 90 mm (Excluding protrusions)
(100 × 100 only light emitting section + 10 mm)
Material Enclosure exterior: aluminum appearance (matte black paint)
Light-emitting portion diffusion plate: SUMIPEX 032 (milky white)
Weight reference ) DKVW 700515 Approximately 7.5 kg
LED drive system All LED series / constant current DC drive
LED driving current 350 mA ± 5% (Standard)
LED drive current ripple 250 mAp-p
LED dimming control Analog control * Variable from 70% to 100% with built-in multi-turn potentiometer
Rated input voltage AC 100 V ± 5% 50 VA / 60 Hz
Power switch Yes (installed on the back)
Power supply input Inlet terminal for AC power supply
Operating temperature 10 ℃ ~ 40 ℃
Humidity used 65% RH (without condensation)
Expected lifespan About 20,000 hours (unofficial expected lifetime)

Page top

OS Tester DKOST-1000 PT

Measurement example (OPEN, SHORT, LEAK test)

Characteristics

  • Supports simultaneous measurements (up to 8 same measurements) using multiple pin devices (up to 1024 pins)
  • High precision, high speed measurement realized
  • Constant voltage output current measurement / constant current output voltage measurement
  • Handler interface (TTL) as standard equipment
  • Because semiconductor relays are used, there is no need for replacement due to the life of the relay
  • Easy operation using the Windows GUI
  • Self-diagnostic function as standard, easy to calibrate
  • A curve trace is included as a standard for analyzing each pin
Main Specifications
Input AC 100 to 240 V, 50/60 Hz
Test item 2 types: Voltage applied current measurement and current applied voltage measurement
Simultaneous measured number You can choose from one measurement or 2 to 8 simultaneous measurements
Number of measurement pins Up to 1024 pins
Application range for measurement Voltage applied: applied voltage ± 10 V (resolution: 20 mV)
Applied current: applied current ± 20 μ, ± 200 μ, ± 2 μ, ± 20 mA (resolution is 1/1000, respectively)
Measurement range When voltage is applied: Measured current 2 μ, 20 μ, 200 μ, 2 μ, 20 mA (resolution is 1/1000 each)
When current is applied: Measured voltage: ± 10 V (Resolution: 20 mV)
Interface For DUT: Cable connection (68 pin half pitch)
Handler I / F Our standard specification
ADVANTEST specification (GPIB option)
IBM PC / AT compatible machine (PS / 2 mouse & keyboard, 10BASE-T / 100BASE-TX, VGA)
Barcode reader (option) connectable

Page top

Tools and control panel

Assembly tool
Various board related

Page top